Consumable materials used for infusion and vacuum bagging applicaions. Available with different options.Please get contact with us for detailed informations of these products and other product types not included in these table.
| VACUUM FILM | Vacuum films are co-extrude multi-layer films used for infusion and vacuum bagging applicaions.Available in various technical characteristics and dimensions. |
|---|---|
| SEALENT TAPE | Sealent tapes for different process tempratures and surfaces in infusion applications. |
| FLOW MESH | Flow mesh design for distibuting the resin homogeneneously and efficiently on mould surface, during to infusion process. |
| PEEL PLY | Peel ply fabrics used to texture the surface of composite laminate and these surface help for secondary bonding or painting of composite laminate.Also peel ply fabrics reduce or eliminate the need for sanding or abrading surface. |
| PERFORATED RELEASE FILM | Economic release film used to seperate peel ply and breather on infusion process. |
| BREATHER | Breather fabric is a lightweight, absorbent, non-woven polyester fabric that provides a path for air to be removed within the vacuum bag while maintaining the vacuum consistently throughout the mold, all of which helps consolidate the laminate. Breather fabric also absorbs excess resin |
| VACUUM PUMP | Vacuum pumps to output of required vacuum for distibuting resin in the mould. İt’s offer with various capacity |
| VACUUM MANOMETER | İts use to control vacuum level and control the vacuum |
| VACUUM LEAK DETECTOR | Small, hand-held leak detector is ideally suited to the detection of leaks within the vacuum bag and the associated through-bag vacuum connectors and vacuum hoses |
| RESIN TRAP (VACUUM VESSEL) | Vacuum-sealed tank is installed between the mold and the vacuum pump to capture excess resin that enters the vacuum line before it can damage your equipment.. As well as its allow to remove air bubbles from liquid materials. VT5(5 lt) and VT10 (10lt) versions are available. |
| VACUUM FITTINGS | Connectors and fittings used to in order to get a vacuum and resin flow in infusion process... |
| PE HOSE / SPIRAL HOSE | Various PE Hose and Spiral Hose for infusion applications |
| RTM and LIGHT RTM MOULD SEALERS | RTM mould sealers to close and seal classical RTM or Light RTM moulds. |
| CLAMP and RTM ADAPTOR | Pliers used to stop resin flow without any damage on hose |
